The advantages of cellulose insulation:
 It is exempt of any harmful substance - it is fully natural, no health risk involved.
 Good filling up capacity - it fills up even the thinnest and tiniest cavities.
 Due to its high volume density (40-55 kg/m3 blow-in density in the attic, and 45-65 kg/m3 blow-in density in walls) and the way of felting it shall not shrink, keeps its form, no heat bridge even with the lapse of time.
 We impregnate it with mineral salts, so it resists to rotting, keeps rodents and insects away.
 Non flammable, because of its borax content (B2 category).
 It is capable to absorb and discharge 30 percent humidity without being compacted, getting shrunk, losing its insulation capacity.
 Under intense heat it remains cool for a long time. It heat reduction is 6 to 8 times of that of fibre based materials, therefore it gets warmed up as much slower.

In winter it is pleasantly warm, due to its extremely high heat storage capacity it uses 26,4% less heating energy then a building insulated with mineral wool.

Its sound insulation capacity is also remarkable, a sound reduction as much as 55-58 dB can be achieved.

Cellulose insulation is nothing else but newspaper, that is separated to its staple fibres by way of a recycling process. Its processing can be twofold: it is either cut to small pieces - in this case the fibre piles are shorter, or the paper is crushed to form long fibre piles. During both processes the printing process plumb content is extracted, and the result is clean cellulose, exempt of any substances harmful for health. 

Optional choices!
Frontispiece facing material: quality mortar, wood, brick, stone. 

Wall systems available for choice:

U = 0,11 W/m²K
Wall thickness: 365 mm

Passive house wall structure
(from inside towards outside)

1. 1,25 plaster fibre
2. Damp stop film
3. Wooden frame size
    20 cm
4. Celluloze insulation size
    20 cm
5. 1,25 plaster fibre
6. 14 cm polystyrene foam
     sheet
7. Quality mortar system

U = 0,23 W/m2K
Wall thickness: 210 mm

Standard wall structure:
(from inside towards outside)

1. 1,25 plaster fibre
2 .damp stop film
3. wooden frame size
    12 cm
4. Cellulose insulation
5. 1,25 plaster fibre
6. 6 cm polystyrene foam
    sheet
7. Quality mortar
     system
 Austrotherm 
  facing insulation
 Glass-fibre cloth
 Rendering
 Colour
 

U = 0,19 W/m2K
Wall thickness: 260 mm

Exclusive wall structure:
(with wooden front wall, from inside towards outside)

1. 1,25 plaster fibre
2 .damp stop film
3. wooden frame size
    15 cm
4. Cellulose insulation
5. 1,25 plaster fibre
6. Joisting and in
    between 8 cm
    polystyrene foam 
    sheet
7. Wood covering
 

U = 0,14 W/m2K
Wall thickness: 330 mm

Exclusive + wall structure:
(with brick front wall, from inside towards outside)

1. 1,25 plaster fibre
2. damp stop film
3. wooden frame size
    20 cm
4. Cellulose insulation
5. 1,25 plaster fibre
6. Steel frame in
     between
    10 cm polystyrene
     foam sheet
7. Brick covering